Current announcements from IMC

ISO/IEC - 17025 Reaccreditation

1/2017 - Industrial Measurement and Control passes its ISO/IEC - 17025 reaccreditation audit with no major or minor problems again.

BASF Polyol Reactor Upgrade

1/2017 - IMC completed BASF Polyol Reactor upgrade project in Wyandotte Michigan. This project also included (SIS) using safety instrumented systems to complement their process control systems.

Modernization Project Award

1/2017 - IMC currently was awarded a modernization project for Flat Rolled Leveling. PLC and HMI modernization. Customer requested and accurate display and record of Leveler Roll Positioning

IMC hires Rob Heredy

1/2017 - Rob brings 12 years of Industrial Control Automation Field Service and Maintenance

Dover Power and Light Partnership

12/2016 - Dover Power and Light continues its partnership with Industrial Measurement for its excellent service from Dave Crissman.

IMC Field Service and Modernization

11/2016 - IMC Field Service and Modernization is currently active with Flat Rolled Slitting Line project. This project will increase Reliability with modernization of the PLC, Drive, and HMI. Improved Uncoiler and Rewind Pneumatic Brake Tension Control

Adam Derenzis supports BASF

5/2015 - Adam Derenzis contines to support BASF Lithium battery plant in Elyria.

IMC hires Scott Wood

2/2015 - Scott brings 30 years of Field Service, Field Modernization, and Project Management

IMC welcomes Al Kopnicky and Joe Kopnicky

7/2014 - Al Kopnicky and Joe Kopnicky specialize in Allen Bradley and HMI programming. The father-son duo provide IMC with decades of experience and knowledge.

IMC is accredited with ISO/IEC 17025 certification

6/2014 - IMC is accredited with ISO/IEC 17025 certification, again. A copy of the certificate is available on this website.

IMC helps Republic Steel

6/2014 - IMC helps Republic Steel with the startup of their new EAF furnace as well as both their casters.

IMC welcomes Mike Plechaty and Larry Mills

3/2014 - Larry has more than 45 years experience and training in instrumentation and is growing our business in western Ohio and Indiana. Mike specializes in auto CAD layouts, PLC programming, circuit design, and process control.

IMC Hires Jay Pomeroy

7/2013 - Jay brings over 30 years’ experience on Power Plant controls and Instrumentation

IMC Welcomes Chris Smith to our Staff

2/2013 - Chris brings over 28 years of experience in instrumentation, controls and process expertise- Welcome aboard!

IMC Continues to Support BASF

8/2011 - Industrial Measurement continues to support BASF in their $6 million Automationization project for the south end.

Good Luck Kris Harrelson

6/2011 - Good luck to Kris Harrelson. Kris has pursued a sales career with one of our Vendors. We wish him the very best.

Congratulations Again to Bethany and Kris

4/2011 - Congratulations again to Bethany and Kris on their pregnancy!

Welcome Aboard Howard Johnston

1/2011 - Welcome aboard Howard Johnston! Howard worked for ABB and has over 30 years experience with their products.

IMC Welcomes Aboard Adam Derenzis

11/2010 - IMC welcomes aboard Adam Derenzis. Adam brings over 5 years of steel mill experience as well as his extensive knowledge of Allen Bradley and Wonderware, as well as Level 1 instrumentation.

Congratulations to Bethany and Kris

5/2010 - Congratulations to Bethany and Kris on their marriage on May 30th. The wedding and reception was fantastic.

IMC Provides Panels and Startup Assistance

5/2010 - IMC provides panels and startup assistance using Honeywell's HC-900 system for OSU. GO Buckeyes!

IMC Passes IS0/IEC 17025 Reaccreditation Audit

4/2010 - Industrial Measurement and Control passes its ISO/IEC - 17025 reaccreditation audit with no major or minor problems again.

IMC Passes ISO/IEC 17025 Proficiencies

3/2010 - IMC passes all proficiency testing with flying colors that are required to maintain its ISO/IEC 17025 accreditation.

IMC Finishes Project for Edwin Hatch Nuclear Power Plant

1/2010 - Industrial Measurement finishes engineering/configuration project consisting of Yokogawas new 1700 controllers for Edwin Hatch Nuclear Power Plant in Baxley, Georgia.

IMC Proposes Casual Measurement Partnership with KAT Enterprises

1/2010 - IMC proposes casual measurement partnership with KAT Enterprises in Richfield, Ohio with their new Water Street project.

IMC Provides Start Up Assistance to US Steel

10/2009 - IMC provides start up assistance to US Steel on furnaces that have been down. Good work Tommy.

Industrial Measurement provides 3rd party services

10/2009 - Industrial Measurement provides 3rd party software/hardware/integration services to Yokogawa Corporation on any new projects that Yokogawa Corporation may need assistance on. Thank you Big Chris.

Duke Energy partners with Industrial Measurement

9/2009 - Duke Energy partners with Industrial Measurement for outage and emergency support. Nice job Cuffy

IMC representative to attend seminar

9/2009 - IMC representative to attend Yokogawa Product Development Seminar at Yokogawa's headquarters in Newnan, Georgia.

Kris Harrelson and Bethany Trapp Engagement

8/2009 - Congratulations to Kris Harrelson and our deepest sympathy Bethany Trapp on their recent engagement. A May 2010 wedding is planned.

IMC continues supporting BASF

8/2009 - IMC continues supporting BASF in MI at their new Polymer plant. Very nice job Kris and Pat.

IMC partners with BASF

6/2009 - Industrial Measurment & Control becomes primary instrumentation startup assistance group for BASF new $400 million polymer plant in Wyandotte, Michigan. This plant is the world's largest Prophy-Bus Installation in the world using over 400 Endress Hauser Instruments.